Bash-Abfragen für alles Mögliche: Unterschied zwischen den Versionen

Aus aredn.dg5mgj.de
Zur Navigation springenZur Suche springen
Zeile 153: Zeile 153:
 
'''Auslastung des Rechners mit Filtermöglichkeiten'''
 
'''Auslastung des Rechners mit Filtermöglichkeiten'''
 
  '''$ htop'''
 
  '''$ htop'''
−
Zeigt wie <code>top</code> die vorhandenen Prozesse an, bietet aber bessere Auswahlmöglichkeiten
+
... zeigt wie <code>top</code> die vorhandenen Prozesse an, bietet aber bessere Auswahlmöglichkeiten<br>
 +
installieren mit <code>$ sudo apt-get install htop</code>
 +
 
 +
'''aktive Jobs aus der crontab anzeigen'''
 +
$ '''crontab -l | grep -v '^#''''
 +
Bei dieser Anzeige werden alle Kommentare ausgeblendet
 +
 
 +
'''Prozesse des crond anzeigen - laufende crontab-Jobs'''
 +
$ pstree -pa `pgrep cron`
 +
cron,950 -f -P
 +
Aktuell kein laufender Cron-Job. Ansonsten wird der komplette Prozessbaum angezeigt.

Version vom 11. Juni 2024, 15:50 Uhr

Ein kurzer Griff zum Terminal und schon hat man die Info

Hier liste ich so einige Abfragen auf, welche sicher interessant sind.

Memory

Welche Memoryausstattung hat mein Rechner und welches Swap wird benutzt?

$ free -h
               gesamt       benutzt     frei      gemns.  Puffer/Cache verfügbar
Speicher:       15Gi       2,3Gi       9,9Gi       509Mi       3,3Gi        12Gi
Auslager:       23Gi          0B        23Gi

Der Parameter -h lässt die Werte in lesbarer Form (--human) anzeigen

$ swapon -s
Filename				Type		Size		Used		Priority
/dev/sda1                              partition	25165820	0		-2

Der Parameter -s (--summary) zeigt diese Auswertung an

CPU

Was läuft denn für eine CPU und wie viele Kerne und Threds hat diese

$ sed -n '/model name/p' /proc/cpuinfo | sort -u 
model name	: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz

Es werden alle "Modellnamen aus der Liste geholt und dann mit sort vereinzelt.

Genauere Informationen zum ersten Prozessorkern

$ sed -n '1,/^$/p' /proc/cpuinfo
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 60
model name	: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz
stepping	: 3
microcode	: 0x28
cpu MHz		: 800.000
cache size	: 6144 KB
physical id	: 0
siblings	: 8
core id		: 0
cpu cores	: 4
apicid		: 0
initial apicid	: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fm  cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm cpuid_fault epb invpcid_single pti ssbd ibrs ibpb stibp  tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt dtherm ida arat pln pts md_clear flush_l1d
vmx flags	: vnmi preemption_timer invvpid ept_x_only ept_ad ept_1gb flexpriority tsc_offset vtpr mtf vapic ept vpid unrestricted_guest ple
bugs		: cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit srbds mmio_unknown
bogomips	: 4988.44
clflush size	: 64
cache_alignment	: 64
address sizes	: 39 bits physical, 48 bits virtual
power management:

Alle Informationen zu allen Prozessorkernen bekommt man mit less /proc/cpuinfo

Festplatte und SSD

Welche Festplatten sind vorhanden und welche Partitionen sind darauf

$ lsblk
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
sda      8:0    0 953,9G  0 disk 
├─sda1   8:1    0    24G  0 part [SWAP]
├─sda2   8:2    0   128M  0 part /boot/efi
├─sda3   8:3    0    52G  0 part 
├─sda4   8:4    0    52G  0 part 
├─sda5   8:5    0   128G  0 part /
└─sda6   8:6    0 697,7G  0 part /home
sdb      8:16   0   1,8T  0 disk 
└─sdb1   8:17   0   1,8T  0 part /data
sr0     11:0    1  1024M  0 rom  

Welchen Label und UUID haben diese Partitionen

$ blkid
/dev/sdb1: LABEL="daten" UUID="6eb24451-0ec5-4a0c-bb57-5ea515cf01a4" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="5144b5ca-8634-4dc0-846a-cb291a09e41a"
/dev/sda4: LABEL="home-alt" UUID="53286760-5dcc-41c5-b29e-de5576491656" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="home-alt" PARTUUID="13ef0d09-126c-4d1c-af8a-9133b96689f4"
/dev/sda2: LABEL_FATBOOT="EFI" LABEL="EFI" UUID="2547-1779" BLOCK_SIZE="512" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="ba4c278c-13a1-48b9-b801-0e81176a8c6e"
/dev/sda5: UUID="78b49306-74c5-4e07-a19b-cc92bb153736" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="root" PARTUUID="548eccf0-7d6c-464a-988a-0b435eb1a26e"
/dev/sda3: UUID="63e7caac-d7bc-447b-a6a0-ec7365524d9c" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="root-alt" PARTUUID="5cb81689-d726-4990-9fdd-51d777be9198"
/dev/sda1: UUID="bf1d7fde-24ca-4e27-bf94-4261e85dd6b2" TYPE="swap" PARTUUID="781d2d5d-a8b7-4dd8-930c-f593ebfd401f"
/dev/sda6: UUID="23090bf2-b747-4048-9b03-544ddbab9eb2" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="home" PARTUUID="251a8385-451c-4915-be64-42b2777a35ba"

Wie geht es denn einer bestimmten Festplatte

$ sudo smartctl -A /dev/sdb
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-112-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   079   064   006    Pre-fail  Always       -       72944751
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   077   077   020    Old_age   Always       -       23958
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       2
  7 Seek_Error_Rate         0x000f   083   060   045    Pre-fail  Always       -       4483255039
  9 Power_On_Hours          0x0032   070   070   000    Old_age   Always       -       26663 (227 39 0)
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   092   092   020    Old_age   Always       -       8660
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       13
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   071   037   040    Old_age   Always   In_the_past 29 (0 130 31 28 0)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       45
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       75
193 Load_Cycle_Count        0x0032   087   087   000    Old_age   Always       -       26975
194 Temperature_Celsius     0x0022   029   063   000    Old_age   Always       -       29 (0 15 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       19670h+56m+08.684s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       56645851929
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       72661152743
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

Inhalt auf Festplatten

Welche Pfade sind denn auf meiner Festplatte (begrenzte Anzeige)

$ tree -dlL 3 /data
$ tree -dlL 2 /home
/home
├── Backup
│   ├── TuxedoI7_2023-02-12
│   ├── TuxedoI7_2023-02-21
│   └── TuxedoI7_2023-03-07
├── lost+found  [error opening dir]
├── rudi
│   ├── Bilder
│   ├── Dokumente
│   ├── Downloads
│   ├── dwhelper
│   ├── EXPORTS
│   ├── Grub-Themen
│   ├── logfiles -> /data/logfiles
│   ├── Musik
│   ├── Öffentlich
│   ├── Old Firefox Data
│   ├── PlayOnLinux's virtual drives -> /home/rudi/.PlayOnLinux//wineprefix/
│   ├── Rudi_hilf_mir 
│   ├── Schreibtisch
│   ├── Videos
│   ├── Vorlagen
│   └── Warpinator
└── timeshift
    ├── snapshots
    ├── snapshots-boot
    ├── snapshots-daily
    ├── snapshots-hourly
    ├── snapshots-monthly
    ├── snapshots-ondemand
    └── snapshots-weekly

30 directories


Prozesse suchen und anzeigen

Auslastung des Rechners mit Filtermöglichkeiten

$ htop

... zeigt wie top die vorhandenen Prozesse an, bietet aber bessere Auswahlmöglichkeiten
installieren mit $ sudo apt-get install htop

aktive Jobs aus der crontab anzeigen

$ crontab -l | grep -v '^#'

Bei dieser Anzeige werden alle Kommentare ausgeblendet

Prozesse des crond anzeigen - laufende crontab-Jobs

$ pstree -pa `pgrep cron`
cron,950 -f -P

Aktuell kein laufender Cron-Job. Ansonsten wird der komplette Prozessbaum angezeigt.